Oxygen Cone
Our production of Oxygen cones are designed to optimize the saturation of oxygen and ozone in water. Gas transfer efficiency of up to 100% is possible. Water and oxygen enter the top of the cone at a relatively high velocity. The water flow pushes the oxygen bubbles down and as the cone expands the velocity decreases and remains until the bubbles are completely dissolved. Fiberglass Oxygen Cones are produced in 6 different flow rates and sizes and are made using high quality fiberglass. It is designed to be operated at pressures up to 20 bar. All cones are equipped with sight glass, pressure gauge, bleed valve and relief port.
Oxygen Cone
BLOWER CODE | Max WaterFlow (m³/h) | Inlet/ outlet | h (mm) | H (mm) | d (mm) | D (mm) | Volume (Lt) |
---|---|---|---|---|---|---|---|
FP-15
| 15
| 75
| 300
| 1300
| 80
| 361.5
| ~54
|
FP-30
| 30
| 110 | 410 | 1740 | 180 | 428.5 | ~237
|
FP-60
| 60
| 125 | 415
| 2200 | 130
| 563.5 | ~518
|
FP-90
| 90
| 125
| 470
| 2250
| 295
| 607 | ~652
|
FP-110
| 110
| 125 | 470
| 2700
| 55 | 669
| ~843
|
FP-140
| 140
| 160
| 540
| 3200
| 55
|
790
| ~1597
|
- 2 Bar It Works Under Low Pressure.
- 4 Bar High Pressure Product Weights Increase By 50%.