Separator Filters
Type of Treatment
- Coarse particles in the water, and sand filtration to reduce the burden of keeping the other stages of filtration.
- Keeps all particles from to 70 microns
- Filtration is from 1 m3 /hr. to 5000 m3 /hr
- System is working to clean
- Does not require backwash
- Does not require maintenance
- There is no part will change
- Untouched cleaning with automatic purge valve system
- Extremely easy assemble
Technical Specifications
- Capacity (m3/h): 1m3/h-5000 m3/h
- Inlet/Outlet Dimensions: 1/2" (DN15) – 24” (DN600) , with PN16 DIN 2576 Flange Connection or BSP Threated
- Discharge: 1/2" (DN15) – 3” (DN80) , with PN16 DIN 2576 Flange Connection or BSP Threated
- Filtration Degrees: 70 microns
- Min.Working Pressure: 1 bar (15 psi) lower pressures can be produced according to the needs.
- Max.Working Pressure: 10 bar (45 psi) higher pressures can be produced according to the needs.
- Pressure Drop: Max. 1 bar (15 psi)
- Max.Working Temperature: 80⁰C-100⁰C
- Material of Construction: Carbon Steel with Epoxy Coated, AISI304 and AISI 316 Stainless Steel
- Discharge Valve: Electrical Actuator Valve, Pneuöatic Actuator Valve, Pinch Valve 24V or 220V
- Electrical Control Panel: 380 V , Three-Phase , 50 Hz with Digital Timer Control (if you have another electrical specification, can be make new design)
Technical Specifications
- Capacity (m3/h): 1m3/h-5000 m3/h
- Inlet/Outlet Dimensions: 1/2" (DN15) – 24” (DN600) , with PN16 DIN 2576 Flange Connection or BSP Threated
- Discharge: 1/2" (DN15) – 3” (DN80) , with PN16 DIN 2576 Flange Connection or BSP Threated
- Filtration Degrees: 70 microns
- Min.Working Pressure: 1 bar (15 psi) lower pressures can be produced according to the needs.
- Max.Working Pressure: 10 bar (45 psi) higher pressures can be produced according to the needs.
- Pressure Drop: Max. 1 bar (15 psi)
- Max.Working Temperature: 80⁰C-100⁰C
- Material of Construction: Carbon Steel with Epoxy Coated, AISI304 and AISI 316 Stainless Steel
- Discharge Valve: Electrical Actuator Valve, Pneuöatic Actuator Valve, Pinch Valve 24V or 220V
- Electrical Control Panel: 380 V , Three-Phase , 50 Hz with Digital Timer Control (if you have another electrical specification, can be make new design)
Working Prensible
- Dirty water, as a tangential cyclone separator filter through the inlet pipe connection is part of the system.
- Possession of all the particles in the system due to centrifugal force of water entering the filter goes down the inner side walls of the thrown correctly.
- The edges of the diaphragm plate to prevent the escape of water through the Cyrillic to the particle concentration in the chamber is collected at the bottom.
- Here, the particle traps to prevent pass through and manually or electrically operated valve on the top side discharge with the help provided.
- Electrical actuatörlü valve 24 V or 220 V and max.10W power is consumed.
- Filter system, digital timer (timer), along with the pollution load of the water flow volume automatically depending on an increase or decrease in work-provided.
- In addition, how long the system will run through the system timers, how much time would discharge his perception of the system are provided.
- System max.10W health is making electricity in an electrical power max. savings are provided.
- Thus, the system will check continuously without the need for a personnel system itself, depending on how long the system will work and the water level changes are done to protect yourself .