Automatic Filters
Areas of Application
- In the food industry, sand industry, textile industry, chemical industry, mining industry, cement, glass and ceramics industry, forest products industry, dams, irrigation canals, fish farms, cooling towers, agriculture and livestock sector, the HEPP projects, in short, wherever there is water used in this system is provided
Technical Specifications
- Capacity (m3/h): High capacities
- Inlet/Outlet Dimensions: 2" (DN50) – 24” (DN600) , with PN16 DIN 2576 Flange Connection
- Filtration Degrees: Until to min.20 microns senstive filtration
- Min.Working Pressure: 2,5 bar (36 psi)
- Max.Working Pressure: 10 bar (45 psi)
- Pressure Drop: Max. 0,1 bar (1,45 psi)
- Max.Working Temperature: 60⁰C
- Self Cleaning Time: 25-30 sec.
- Material of Construction: Carbon Steel with Epoxy Coated, AISI304 and AISI 316 Stainless Steel
- Screen of Construction: AISI304 and AISI 316 Stainless Steel
- Coating of Construction: Oven Epoxy Coated
Technical Specifications
- Capacity (m3/h): High capacities
- Inlet/Outlet Dimensions: 2" (DN50) – 24” (DN600) , with PN16 DIN 2576 Flange Connection
- Filtration Degrees: Until to min.20 microns senstive filtration
- Min.Working Pressure: 2,5 bar (36 psi)
- Max.Working Pressure: 10 bar (45 psi)
- Pressure Drop: Max. 0,1 bar (1,45 psi)
- Max.Working Temperature: 60⁰C
- Self Cleaning Time: 25-30 sec.
- Material of Construction: Carbon Steel with Epoxy Coated, AISI304 and AISI 316 Stainless Steel
- Screen of Construction: AISI304 and AISI 316 Stainless Steel
- Coating of Construction: Oven Epoxy Coated
Working Prensible
- Water entering the inlet pipe inside the filter, first with coarse screen filter meets in.
- Coarse sieve in the coarse particles in the water is kept here. Later, more accurate multi-layer mesh filter area when the water passes through here.
- Multi-layer mesh filter out the particles by filtration through a fine filter goes to the collector side.
- Multi-layer deposited on the particulate filter on the filter and consequently causing the formation of an impurity layer of a pressure differential constitutes the output manifold.
- This pressure difference values as previously set depending on the digital back-washing unit, washing the discharge valve opens and the discharge pipe by activating back-washing creates a strong outward.
- This flow creates a vacuum suction nozzle with holes on the accumulated particle layer on the filter clean.
- Multi-layer absorbed on the filter dirty water through the cleaning nozzle pipe reducer turbine with the aid of hydraulic or reducer motor assistance and bringing in the rotational movement to clean the filter surface and consequent absorption.
- During the filtration process continues in the backwash, the filter backwash process, then be ready until the next pressure differential signal. It doesn't need any backwash pump for this filter.. Backwash process time between to 25-35 seconds.. Self cleaning filter is during washing